|
If
you don't see what you're looking for please e-mail us your
request
M.D. McCauley Co., Inc.
760 S. Rochester Ave. Unit " C "
Ontario, CA 91761 U.S.A.
Tel: 909-390-9313
Fax: 909-390-9061
E-mail: info@xraymdm.com |
 |
|
|
|
 |
 |
Wolf Trimline Plus Hi-Lo |
|
| |
|
| |
The Trimline Plus Hi Lo provides two light intensities per each 14" x 17" viewing area. You can go from 1,730 to 3,426 Candela per square meter at the push of a button. Uniquely at the lower light intensity, all 4 bulbs remain lit to maintain the even light distribution.
The Trimline Plus Hi Lo is available in any one of 12 sizes (shown here is a 2 in 1 unit with the left hand unit switched to "Hi" to illustrate the difference between Hi and Lo).
The Trimline Plus Hi Lo features a sleek 3-1/4" deep cabinet with a baked on white polyurethane finish, a roller grip film retainer, film activated auto switches (the illuminator goes on automatically when film is inserted), a hospital grade plug and cluster switches, on 4 over 4 units and up.
|
| |
|
| Features: |
|
4 lamp 15 Watt Daylight F15T8D. Switch dims all 4 bulbs from 3,426 to 1,730 Candela per square meter. |
|
Ballast 2 lamp, class P thermally protected 0.55 Amp, 120V, 60Hz, UL and CSA listed
|
|
3 wire 8' line cord with spark proof hospital grade plug.
|
|
Three-position rocker switch controls individual viewing panels on single through 6 in 1 blank units. All tier units (except 1 over 1 and 2 over 2) come standard with cluster switch controls for individual Hi-Lo/On-Off-Automatic film activate panel viewing and master on/off switch.
|
|
Film activated on/off switch allows convenient and fast operation, conserves energy, eliminates distracting light from adjacent panels that are not in use, and minimizes heat.
|
|
Wolf's unique E-"Z" BarT wall mounting system makes hanging your illuminator quick and accurate.
|
|
Film held with roller gravity grip. Rollers are coated to prevent scratching the film |
|
All housings are durable, welded all steel construction. |
|
Units can be recessed in the wall by attaching an optional recessing frame. |
|
All metal surfaces finished in baked on white urethane-polyester powder coating. |
| Showing Trimline with optional mobile stand |
|
|
|
A single Trimline unit for wall mounting. |
Inverted panels (top & bottom) and a cluster switch. |
|
|
Back corner view showing frame of a recessed unit and 3 wire pigtail. |
A diagram illustrating the Wolf E-"Z" Bar from a side view. Simply mount one bar on the wall, and slip the illuminator bar over it. |
|
| |
|
|
|
|
|
 |
|
|
|
|
