MDM XRAY

X-Ray Cassette Holders

Wall Cassette Holder

All metal, cassette holder is easily mounted to the wall with 4 screws. The cassette holding channels slide freely along the vertical rails yet lock firmly at any elevation by means of two positive spring locks. Chin rest on the upper cross channel is a great help in positioning the patient. Finish in baked enamel

Cat. No. 11146 fits cassettes up to 14x17"
Travel: 22"
Exterior dimensions: 14.5" width, 47" height, depth 5"

Cat. No. 11146-6 fits cassettes up to 14x36"
Travel: 33"
Exterior dimensions: 14.5" width, 66" height, depth 5"
Maximum opening for grid 0.562"

X-Almor Mobile Tilting Cassette Holder

HOLDS CASSETTES IN ANY POSITION. MULTIPLE APPLICATIONS. COUNTERBALANCED - ONE HAND OPERATION. ADJUSTABLE FOR MOST CASSETTE SIZES (UP TO 14x17"). LOAD FROM EITHER SIDE
Cat. No. 480

The 480 mobile tilting cassette holder is designed to go anywhere and hold a cassette in any position.

Features include: 58" vertical counterbalanced travel, 1800 tilt capability, 3600 rotation, telescopes to a forward extension of 22", accepts cassette sizes up to 14"x17", chin rest, a positive locking system and channels for a stationary grid. The mobile stand is constructed of heavy gauge steel with a cast aluminum body and stainless steel vertical travel rods. The base which measures 16.5" wide and 24" deep is mounted on a set of hard rubber casters which provide complete mobility. A brake system on the rear casters allows the holder to be locked after positioning.
Specifications:
Finish: light grey baked enamel.
Travel: 58"
Exterior dimensions: 16.5" width, 64.5" height
Depth of base: 24"
Approx. shipping wt.: 129 Lbs
Maximum opening for grid: 0.187"

X-ALMOR 14"x36" ADAPTER SERIES

Converts most 14x17" cassette holders or buckys to accept 14x36" cassette & grid
PORTABLE
ALUMINUM/STEEL CONSTRUCTION
GRID CHANNELS
LOAD FROM EITHER SIDE

This series enables your present cassette holder (or bucky) to accept a 14"x36" cassette and grid. The 474 is constructed of aluminum upright supports with glides which will fit most cassette holders. Simply set your holder for a 14"x17" cassette and slide the adapter into your holder as you would a cassette. Grid channels which will accept a 14"x36" stationary grid of .187" maximum thickness are built into the adapter.

The 474M is constructed of aluminum with steel brackets for hanging on to the front of a 14"x17" bucky.

Important: SPECIFY DEPTH OF BUCKY WHEN ORDERING.
Finish: white.

Exterior dimensions:
Cat. #	Adapter for:	width	Hgt.	depth
474	14x17" cassette holder	15"	37.5"	3.25"
474M	14x17" bucky	15"	37.5"	adj

X-Almor Mobile Floor Stand Cassette Holder

IDEAL FOR PORTABLE X-RAYS
COUNTERBALANCED - ONE HAND OPERATION
ADJUSTABLE FOR MOST CASSETTE SIZES

These mobile floor stand cassette holders are ideally suited for use with portable X-Ray units. The 475 cassette holder will accommodate all cassette sizes from eight to seventeen inches in either direction.

The 475M is designed to accept all cassette sizes up to a 14"x36".

The sturdy floor stand is constructed of heavy gauge steel with a cast aluminum top and base. Wheels mounted to the rear of the base provide complete mobility when the stand is tilted backwards. Leveling screws are provided to assure firm floor contact for complete stability when unit is in use.

Features include: a chin rest, vertical counterbalancing, adjustable cassette channels, vertical lock, stainless steel vertical travel rods and grid channels for a stationary grid.

Finish: light grey baked enamel.

Exterior dimensions:
Cass. Size	Travel	width	Hgt.	Depth of base	Cat. No.
8x10" up to 14x17"	23"	15"	69.75"	22.75"	475
8x10" up to 14x36"	42"	15"	69.75"	22.75"	475M

Maximum opening for grid 0.187"

Deluxe Mobile/Wall Cassette Holder

Holds from 5x7" up to 14x51" cassette size

Cat. No. 10900 Deluxe Mobile Cassette Holder:

Lower cassette assembly can swivel up to 45 degrees to the left or right, complete assembly will rotate 360 degrees to the left or right. Oversize locking wheels make transporting and positioning easy and precise. A low center of gravity gives added stability.

Cat. No. 10910 Deluxe Wall Cassette Holder:

Lower cassette assembly can swivel up to 45 degrees to the left or right, also features a removable upper cassette arm which adds greater stability to the larger 14x36" and 14x51" cassettes.

Table Top Cassette Holder

Holds cassettes up to 14x17". Slides under the patient. Easily handled and stored. R/L marker is attached to unit.
Cat. No. PP155