The Mammo TECHLINE
The Mammo TECHLINE is a dedicated Mammography illuminator designed to create an effective, comfortable reading environment for mammography film interpretation. This unique design incorporates an internal shutter providing the flexibility of reading either 18X24cm or 24X30cm film formats. Available in single tier or two tier surface mount configurations.
Mammo TECHLINE MAM-311: Two tier viewing system creates the optimal environment for diagnostic comparison of base line and current mammograms
Mounting Options available:
Can be configured for desk top mounting which features a vertical top viewing surface and bottom viewing surface angled out at 20 degrees (MTB mounting bracket). This will create for an ideal condition for seated mammography interpretations
Also can be configured for surface wall mounting which features two viewing surfaces positioned vertically on top of one another. Ideally suited for areas with minimal counter or desk space.
Mammo TECHLINE MAM-301:
Single tier viewing surface designed for environments where only one set of mammograms are viewed at a time. For example, a technologists area, patient consultation area or a screening facility.
Mounting Options available:
Standard mounting provides for surface wall mounting featuring a single viewing positioned vertically.
Optional MTB provides for desk top 20 degree angled mounting bracket
STANDARD FEATURES & BENEFITS:
Dedicated modality design
Slim rigid steel construction
TECH-GRIP, roller gravity film holding system
Engineered design easily serviced
Baked white enamel finish
UL listed & CSA approved
ELECTRICAL:
Each MAMMO-TECHLINE draws .93 Amps per tier
Luminance: Each MAMMOTECHLINE viewing panel emits a minimum luminance level of 550 cd/m (light levels are subject to change without notice)
Lamps: Each MAMMO-TECHLINE tier contains three General Electric #F30T12/D or equivalent lamps.
Ballasts: Each MAMMO-TECHLINE tier contains a low leakage rapid start electronic ballast which does not require an external starter. These ballasts are thermally protected and are U.L. and C.S.A. listed components.
Grounded Chassis with 3 wire 7 ft. Cord and NEMA 5-15P, 2 Pole, 3 wire ground plug.
Complies with MQSA and ACR recommended Luminance Levels: all Mammo-Techline configuration engineered to comply with and exceed the MWSA and ACR recommended minimum mammography luminance level of 35oo NIT
CONSTRUCTION: Rigid welded steel construction.
FILM GRIP : MAXANT's TECH-GRIP roller gravity film holding system is maintenance free and requires no field adjustments.
SHUTTER : Interior mechanical shutters are STANDARD on all MAMMO-TECHLINE configurations. This feature allows the reader to eliminate harmful extraneous light from shining in a reader's eyes when reading 18 x 24cm Mammography film formats. When the shutter is retracted, the full viewing area is opened creating the viewing area for 24 x 30cm Mammography film formats.
DIFFUSING PANEL : The diffusing panel is shatter resistant and secured flush with the face of the unit. The panel is easily removed from the fixture without tools facilitating quick and easy replacement of lamps. The material is U.L. recognized Plexiglas thermoplastic.
SWITCHES : Each MAMMO-TECHLINE viewing area is controlled by a two position ON/OFF rocker switch. The switches are located on the right hand side of each fixture.
