|
If
you don't see what you're looking for please e-mail us your
request
M.D. McCauley Co., Inc.
760 S. Rochester Ave. Unit " C "
Ontario, CA 91761 U.S.A.
Tel: 909-390-9313
Fax: 909-390-9061
E-mail: info@xraymdm.com
|
 |
|
|
|
 |
|
Maxant Techline Illuminators |
|
| |
|
TECHLINE 200, 300, 400 Series
MAXANT has designed the TECHLINE 200, 300 & 400 series to meet the growing needs of today's users of diagnostic imaging products. Offered in configurations from a single panel through six over six panels surface and recess mounted the TECHLINE provides flexibility in a universal design that incorporates the most common features requested by today's imaging professionals.
TECHLINE 200 series:
Standard two lamp per panel light source for films of normal density |
| |
Light output levels: NITS ft. lamberts
standard single intensity 1850 525
|
TECHLINE 300 series:
Provides additional brightness for dense film.
* Meets the MQSA/ACR recommended 3500 NITS light output level for mammography film formats.
Light output levels: NITS ft. lamberts
standard single intensity 3800* 1100
Optional Dual Intensity - Low 3300 950
Optional Dual Intensity - High 3925* 1125
TECHLINE 400 series:
The brightest light source available in the TECHLINE series. Also for dense films.
* Meets the MQSA/ACR recommended 3500 NITS light output level for mammography film formats.
Light output levels: NITS ft. lamberts
standard single intensity 4250* 1250
Optional Dual Intensity - Low 3600 1050
Optional Dual Intensity - High 5000* 1450
STANDARD FEATURES & BENEFITS
Thin 3 3/8" profile
Sturdy steel construction
TECH-GRIP, roller gravity film holding system
Centralized cluster switching
Continuous bottom film ledge
Minimal 1.8" separation between tiers of two tiered fixtures
Engineered design easily serviced
Baked white enamel finish
UL listed & CSA approved
OPTIONAL FEATURES & BENEFITS
Film activated micro switch
Dual intensity (Available on TECHLINE 300 & 400 series only)
Multi-Panel master switch
Surface mount hardwire
Hospital grade plug
Diagnostic Viewing Center
|
|
|
|
| TECHLINE SPECIFICATIONS: |
| DESCRIPTION |
DIMENSIONS
|
200 SERIES 2-Lamp |
300 SERIES
3-Lamp |
400 SERIES
4-Lamp |
| Surface Mounted |
Viewing Area* |
Lenth |
Height |
Cat. # |
Apprx. Shipping wt. LBS |
Cat. # |
Apprx. Shipping wt. LBS |
Cat. # |
Apprx. Shipping wt.LBS |
| Single Panel 14x17" |
14" x 17" |
14" |
21" |
TS-201 |
17 |
TS-301 |
19 |
TS-401 |
19 |
| 2 Panel side by side |
28" x 17" |
28" |
21" |
TS-202 |
33 |
TS-302 |
37 |
TS-402 |
37 |
| 3 Panel side by side |
42" x 17" |
42" |
21" |
TS-203 |
50 |
TS-303 |
56 |
TS-403 |
56 |
| 4 Panel side by side |
56" x 17" |
56" |
21" |
TS-204 |
67 |
TS-304 |
75 |
TS-404 |
75 |
| 5 Panel side by side |
70" x 17" |
70" |
21" |
TS-205 |
84 |
TS-305 |
94 |
TS-405 |
94 |
| 6 Panel side by side |
84" x 17" |
84" |
21" |
TS-206 |
101 |
TS-306 |
113 |
TS-406 |
113 |
| 1 over 1 |
2 x14" x 17" |
14" |
42" |
TS-211 |
33 |
TS-311 |
37 |
TS-411 |
37 |
| 2 over 2 |
2 x28" x 17" |
28" |
42" |
TS-222 |
67 |
TS-322 |
75 |
TS-422 |
75 |
| 3 over 3 |
2 x 42" x 17" |
42" |
42" |
TS-233 |
101 |
TS-333 |
113 |
TS-433 |
113 |
| 4 over 4 |
2 x 56" x 17" |
56" |
42" |
TS-244 |
134 |
TS-344 |
150 |
TS-444 |
150 |
| 5 over 5 |
2 x 70" x 17" |
70" |
42" |
TS-255 |
278 crated |
TS-355 |
298 crated |
TS-455 |
298 crated |
| 6 over 6 |
2 x 84" x 17" |
84" |
42" |
TS-266 |
322 crated |
TS-366 |
346 crated |
TS-466 |
346 crated |
| Recess Mounted |
Viewing Area* |
Wall Cut-Out** |
Cat. # |
Approx. Shipping Wt.LBS |
Cat. # |
Approx. Shipping Wt.LBS |
Cat. # |
Approx. Shipping Wt.LBS |
| Length |
Height |
| Single Panel 14x17" |
14" x 17" |
14.75" |
21.75" |
TR-201 |
20 |
TR-301 |
22 |
TR-401 |
22 |
| 2 Panel side by side |
28" x 17" |
28.75" |
21.75" |
TR-202 |
38 |
TR-302 |
42 |
TR-402 |
42 |
| 3 Panel side by side |
42" x 17" |
42.75" |
21.75" |
TR-203 |
56 |
TR-303 |
62 |
TR-403 |
62 |
| 4 Panel side by side |
56" x 17" |
56.75" |
21.75" |
TR-204 |
74 |
TR-304 |
82 |
TR-404 |
82 |
| 5 Panel side by side |
70" x 17" |
70.75" |
21.75" |
TR-205 |
92 |
TR-305 |
102 |
TR-405 |
102 |
| 6 Panel side by side |
84" x 17" |
84.75" |
21.75" |
TR-206 |
110 |
TR-306 |
122 |
TR-406 |
122 |
| 1 over 1 |
2 x14" x 17" |
14.75" |
42.75" |
TR-211 |
38 |
TR-311 |
42 |
TR-411 |
42 |
| 2 over 2 |
2 x28" x 17" |
28.75" |
42.75" |
TR-222 |
74 |
TR-322 |
82 |
TR-422 |
82 |
| 3 over 3 |
2 x 42" x 17" |
42.75" |
42.75" |
TR-233 |
110 |
TR-333 |
113 |
TR-433 |
113 |
| 4 over 4 |
2 x 56" x 17" |
56.75" |
42.75" |
TR-244 |
146 |
TR-344 |
162 |
TR-444 |
162 |
| 5 over 5 |
2 x 70" x 17" |
70.75" |
42.75" |
TR-255 |
294 crated |
TR-355 |
314
crated |
TR-455 |
314
crated |
| 6 over 6 |
2 x 84" x 17" |
84.75" |
42.75" |
TR-266 |
338 crated |
TR-366 |
362
crated |
TR-466 |
362
crated |
|
*Viewing height is actually 16.5" in order that extraneous light is eliminated when standard 14x17" film is inserted in the roller gravity grip.
** Overall recessed fixture dimensions, including recessed trim length and height, are each 3" greater than surface mounted dimensions. |
Techline Specifications
Light Source & Luminance:
Utilizing a universal body design, the Techline series is available in any of the following light sources:
|
| |
|
Illumination Levels
(Expected Minimum cd/m²) |
Amps
Per Panel |
Voltage
requirements |
Fluorescent
Lamp type |
TECHLINE 200 SERIES |
200 |
0.75 |
118V 60 Hz |
(2)-FIT8/D
Per panel |
TECHLINE 300 SERIES
Standard: High intensity
Optional: dual intensity - Low mode
Optional: dual intensity - high mode |
3500*
2500
3500*
|
0.66
|
118V 60 Hz
|
(3)-F15T8/D
per panel |
TECHLINE 400 SERIES
Standard: high intensity
Optional: dual intensity - low mode
Optional: dual intensity high - mode |
4000*
2000
3800*
|
0.70
|
118V 60 Hz
|
(4)-F15T8/D
per panel |
|
*The noted series exceeds the American College of Radiology recommended light level of 3000 cd/m² for Mammography viewing.
Published readings are 3% less than actual test levels to allow for decreased light output as a result of normal usage.
These light levels are taken from procedures specified by the German DIN 6856 standard. Currently this is the only published standard for evaluating the luminance levels of x-ray illuminators. These levels were measured under the following conditions: an ambient temperature of 21° Celsius (70° Fahrenheit), 118V line voltage, and new lamps. Light levels measured int he field may vary with the local environment, including: lamp age, line voltage, ambient temperature, and lamp temperature. These measurements are subject to change without notice.
|
| SPECIFICATION DATA: |
BODY CONSTRUCTION:
18 Gauge welded steel construction, 3-3/8" deep body.
BALLAST: all ballasts are U.L. listed and C.S.A. approved rapid start, low leakage, thermally protected, Class P type. These ballasts have self starting reliability exceeding 10,000 cycles with an anticipated 50,000 hours of operating life.
LINE CORD AND PLUG: each surface mounted fixture comes standard with a grounded chassis, 7' line cord and NEMA 5-15P 2 -pole, 3 wire ground.
FILM GRIP: roller gravity film holding system accommodates all film thickness variations. This grip will not scratch or tear film Requires no field adjustments. Open sides facilitate viewing of oversize film.
CONTINUOUS BOTTOM FILM LEDGE: allows for the placement of small film formats on the top and bottom of viewing area.
FINISH: Baked white finish is bonded to all steel surfaces to provide durable chip and wear resistant outer surface. Highly reflective inner finish provides optimal light distribution.
DIFFUSING PANEL: 1/8" shatter resistant, U.L. listed translucent thermoplastic.
SWITCHES: the standard two position rocker switch provides manual ON/OFF lighting for each viewing area.
ENGINEERED TWO TIERED FIXTURE DESIGN: two tier configurations have a minimal separation of 1.8" between tiers allowing for convenient top to bottom image comparison.
|
|
ENGINEERED DESIGN FOR EASY SERVICING: viewing panel is easily removed without tools. Fixture is serviceable without having to remove fixture from wall. Individual wireway panels can be easily removed for direct access to problem panels.
CLUSTER SWITCHING: individual rocker control switches are a STANDARD feature and are centrally located at the bottom of the fixture, configured in the same layout as the viewing panels they control.
OPTIONAL FEATURES:
FILM ACTIVATED 3 SWITCH: provides for manual ON/OFF and film activated mode which activates the viewing area when a film is inserted into the grip.
MASTER SWITCH: provided master ON/OFF control of entire fixture.
HOSPITAL GRADE PLUG: heavy duty plug specified in certain municipalities.
SURFACE MOUNT HARDWARE: single electrical power exit location on the rear of fixture allows for surface mounted fixtures to be directly wired to the wall.
DIAGNOSTIC VIEWING CENTER ANGULATION AND CORNER MOUNTING: angled mounting: top tier vertical and bottom tier angled at 20° maintaining centralized cluster switching located at bottom center of fixture which controls top and bottom tiers. (see DVC information )
CORNER MOUNTING: creates an effective solution to awkward corner space. (see DVC information. |
Mounting dimensions:
|
|
|
|
 |
|
|
|
|
